Ascon's R38 Series: Entry Level Controller w/Super-Simplified Programming
Regular price
$125.00
$124.00
Sale
- Very Few Parameters
- Super-Simplified Programming
- Input for J/K/RTD/PTC/NTC
- Resolution 0.1C w/Automatic Scale Change (Auto-Ranging)
- Sensitive Touch Keyboard
- Up to 2 SPDT Relay Outputs
- Switching Power Supply 100... 240 VAC
- Control: PID, On/Off Single or Double Action or SP1/2 Drives Out 1/2
- Parameters Protection w/Programmable Password or Keyboard Lock
- Soft Start or Start Up Delay Function
- Automatic or Stand-by Mode
- Compressor Protection Time
- Direct Access to the Set Point
- Ships In 1-2 Days For Fast and FREE Delivery!
Ascon's R38 Series are super-simplified to program and use. They all come with an ergonomic keyboard which uses the sensitive touch technology. This system is made with a e-fied sensor that guarantees complete protection from dust and liquids. Each unit has start-up delay which avoids the overcurrent device from being activated.
The soft start function makes it possible to eliminate thermal shock and mechanical stress (due to dilation) that a system undergoes during start up. The On/Off SP1 drives out - SP2 drives out 2 feature helps to keep the set points (the working points) of the devices you are actuating, separate for better control of the system. And the Keyboard Lock feature keeps the controller from being tampered by an unauthorized person.
| To Order the models below scroll to the top of the page and choose the desired model from the "Model" drop down menu, then ADD TO CART |
| MODEL | POWER SUPPLY | INPUT | OUT 1 | OUT 2 |
| CN-AS-R38S-HTRRB-E | 100/240 VAC | PTC/NTC/PT1000 | SPDT 8A-AC1 Relay | SPDT 8A-AC1 Relay |
| CN-AS-R38S-HFRRB-E | 100/240 VAC | J/K | SPDT 8A-AC1 Relay | SPDT 8A-AC1 Relay |
| CN-AS-R38S-FFRRB-E | 12VAC/DC | J/K | SPDT 8A-AC1 Relay | SPDT 8A-AC1 Relay |
| CN-AS-R38S-HARRB-E | 100/240 VAC | PT100 | SPDT 8A-AC1 Relay | SPDT 8A-AC1 Relay |
| Datasheets, Instruction Manuals and Certificate of Conformance downloads |
Visit the Ascon's R38 Series:web page to download:
|
SPECIFICATIONS
ELECTRICAL DATA
Power supply: 100/240 VAC or 12VAC/DC
Power consumption: max 6 VA
Device class: Class II
Nominal pulse voltage: 2.5 KV
Isolation: reinforced isolation between low voltage and frontal parts.
THERMOCOUPLE INPUT
Type: J/K
Resolution: 0.1C with automatic scale change
Unit of measurement: C or F
Cold junction: automatic compensation )...+50C
Cold junction accuracy: 0.1C/C @ 25C after warm-up
Calibration: according to EN 60584-1
Burn-out: at the end of the scale
RTD INPUT
Type: Pt 100 and Pt 1000 with 2 wire technology
Resolution: 0.1C with automatic scale change
Unit of measurement: C or F
Burn-out: at the end of the scale
Calibration: according to EN 60584-1
THERMISTOR INPUT
Type: PTC KTY 81-121 (990 ohms @ 25C & NTC 103AT-2 (10 kohms @ 25C)
Unit of measurement: C or F
OUTPUTS
Output 1
Function: control output
Output action: direct/reverse, programmable
Type: a) Relay output
b) Logic tension to drive a solid state relay
Output 2
Function: programmable
Output action: direct/reverse, programmable
Function: control output
Output action: direct/reverse, programmable
Type: a) Relay output
b) Logic tension to drive a solid state relay
COMMUNICATION
Type: TTL Modbus
Isolation: output NOT isolated
Protocol: Modbus RTU
Electrical levels: TTL
Baud rate: 9600
Parity: none
Data formed: 8 bit + 1 start bit + 1 stop bit
FUNCTIONAL DATA
Control: Single action PID with Autotuning
ON/OFF single action
ON/OFF double action (Neutral Zone)
SP1 drives Out 1 -SP2 drives Out 2
Overall accuracy: +/-(0.5% span +/-1 digit @ 25C)
Sampling rate: 1 s
Display updating time: 1 s
Conformity: EMC 2004/108/CE (EN 61326-1) Directive
MECHANICAL DATA
Mounting: flush in panel
Dimensions: 78 x 35 x 64 mm
Panel cut-out: 71 x 29 mm
Weight: 180 g
Protection degree: front protection IP 65; scew terminal IP20
Environmental Data
Pollution category: 2
Installation category: II
Operating temperature: 0...50C
Operating humidity: <95 RH% without condensation
Storage temperature: -25...60C