Roscid's OXYTRANS LC OEM Series is one of the Industries Lowest Cost 4-20 mA Loop Powered Two Wire Oxygen Transmitters
- Ships in 1-2 Days, PLUS FREE SHIPPING!
- Compact Size, Accurate and Inexpensive
- Long Sensor Operating Life
- IP65 Enclosure
- Reverse Voltage Protection and Temperature Compensation
- No Cross Sensitivity to H2 Gas
- Flow-through Measuring cell in Synthetic Material
The OXYTRANS LC OEM series is simple, accurate and an economic measurement of oxygen at trace (ppm) levels and % levels.
Four user specific measuring ranges are available: 0-100ppm, 0-1000ppm, 0-10000ppm and 0-25% of oxygen. Ranges must be specified at time of order.
The OXYTRANS LC OEM series uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, ease of use and long operating life.
Calibration of the series for trace oxygen (ppm) measurements in gas must be done with a calibration gas. The concentration can be chosen freely within the measuring range. In the % range, the unit can be calibrated with air.
Typical applications are found in nitrogen plants, gas manufactures, metallurgical & chemical industries, heat treating and bright annealing and reflow ovens.
| To Order the models below scroll to the top of the page and choose the desired model from the "Models" drop down menu, then ADD TO CART
|OXYTRANS-LC1A||0-100 ppm, Inert Gases|
|OXYTRANS-LC1B||0-100 ppm, Acidic Gases|
|OXYTRANS-LC2A||0-1,000 ppm, Inert Gases|
|OXYTRANS-LC2B||0-1,000 ppm, Acidic Gases|
|OXYTRANS-LC3A||0-10,000 ppm, Inert Gases|
|OXYTRANS-LC3B||0-10,000 ppm, Acidic Gases|
|OXYTRANS-LC4C||0-25% , Inert Gases|
|OXYTRANS-LC4D||0-25% , Acidic Gases|
PPM: 0-100, 0-1000, 0-10000 ppm O2
%: 0 - 25%
CALIBRATION: gas, air
+/-2% FSD t=25C
+/-5% FSD 0>T>50C
90% FSD @ 25C
0-100 ppm <20s
0-1000 ppm <10s
OPERATING TEMPERATURE: 0 - 50C
PRESSURE: 0.1 - 1 bar
SIGNAL OUTPUT: 4-20 mA loop powered
VOLTAGE: 18-35 VDC, reverse voltage protection up to 40VDC
LOAD: typ. 470 Ohm, max 750 Ohm
OXYGEN SENSOR: Micro-Fuel Cell
SIZE: 70mm x 60mm (H x W)
WEIGHT: 0.3 kg