L60 Commercial Grade Fine Wire Thermocouple Welder

Free Shipping! - USA Orders Over $75

Customer Reviews
L60 Commercial Grade Fine Wire Thermocouple Welder
L60 Commercial Grade Fine Wire Thermocouple Welder

L60 Commercial Grade Fine Wire Thermocouple Welder

Regular price $1,675.00 Sale SKU:L60-WELDER
2 In stock* Ships in 2-3 weeks, if NOT in stock
* ships same or next day

  • Simple to Use Thermocouple Welder
  • Weld Wires as Small as 40AWG
  • Designed for the Production of Commercial Grade Thermocouple Junctions
  • Also Suitable for Other Fine Wire Work
  • Front Panel or Footswitch Operation
  • Argon Gas Shield Facility

The L60 Thermocouple Welder & Fine Wire Welder, is a production grade, simple-to-use instrument designed for thermocouple and fine wire welding.

It is primarily designed for use by sensor manufacturers to produce commercial grade thermocouple junctions; it is ideal for producing large numbers of exposed junction thermocouples for test and development laboratories. The L60 Thermocouple Welder is also ideally suited to transducer and RTD extension lead attachment.

Use of the Thermocouple Welder does not require special skills and most operatives will be capable of producing quality work with little practice. The instrument is supplied with a full range of user accessories including a foot switch.

The L60 is suitable for use with wires of up as large as 18AWG and as small as 40 AWG. An argon gas shield facility is included but a satisfactory thermocouple junction is produced without the need for argon gas. The output energy of the L60 Thermocouple Welder can be varied up to 60 Joules.

Supplied complete with the following accessories:

  • Wire Holding Pliers
  • Safety Glasses
  • Magnifying Eyeglass
  • Argon Hose
  • 2 x Carbon Electrodes
  • Spare 2A Fuse & Mains Lead
  • Footswitch

 

To Order  (scroll to top of page and add to cart)
PART NUMBERS DESCRIPTION
L60-WELDERIn Stock Commercial Grade Fine Wire Thermocouple Welder

 Downloads

L60-WELDER Data Sheet

L60-WELDER User Manual

Front Panel Controls

L60 Thermocouple Welder Front Panel Controls
A – ARC

Argon gas and weld current controlled by the “Weld” switch. LED indication.

B – PURGE

Allows the gas line and electrode shield to be purged of air prior to a new welding period.

C - WELD SWITCH

Initiates a welding operation (in “arc” mode also opens the Argon valve).

D - ARGON LED

Indicates when the Argon control valve is open and gas is flowing.

E - WAIT LED

Glows when weld charge is building.

F - READY LED “Ready to Weld” indication.
G - POWER    
    Rotary control of the capacitor charge voltage.
H - LEVEL SELECTOR

Selects the total capacitance available giving the following values with LED indication -

"LO" = 0 to 6 Joules

"MED" = 0 to 28 Joules

"HI" = 0 to 64 Joules

I - ELECTRODE HOLDER

Rotary control of the capacitor charge voltage.

J - RED SOCKET    

Output socket for using the pliers supplied.

K - BLACK SOCKET 
Output socket, this provides an additional ground.

 

Rear Panel Controls

L60 Thermocouple Welder Rear Panel Controls
A – On / Off Switch

Power to instrument on / off

B – Weld Jack Socket

Weld Jack Socket Footswitch connection

C - Argon Inlet

For connection to Argon Supply

D - Power Selection

For selection of 110-120 Vac or 220-250 Vac power supply. Factory default setting: 110-120 Vac

 

 Videos

 

Specifications
Dimensions: 220mm (W) x 120mm (H) x 250mm (D)
Power Consumption: Max 170VA dropping to 20VA during charging
Power Supply: 110-120 Vac or Optional 220-250 Vac, 50-60Hz
Standards: BS EN / CE
Energy Output: 0-60 Joules
Duty Cycle: Minimum 5-10 welds/min
Welding Capacity: Wires 40AWG to 18AWG
Argon Pressure Regulator Level: <70PSI(5 bar)
Argon Connector: 1/4" Hose  Fitting
Weight: 14lbs

Reviews