- Loop Powered, No Extra Power Supply Required
- Compatible with Transducers with EN175301-803 A Standard (DIN43650) Connector
- Display of Alarms: Minimum Value, Maximum Value or Out of Range Values
- Adjustable Offset
- Configuration is Password Protected
- Push-Button Easy Configuration
LoopView is a two-wire 4-20 mA loop-powered indicator which mounts directly on transducers providing a local display. It is compatible with transducers and sensors with EN 175301-803 (German DIN43650 ) connectors. It works with sensors for temperature, pressure, differential pressure, flow, pH, acceleration and others. LoopView is powered by the current loop and requires no additional power.
LoopView has a 4-digit display and 2 keys which allow for quick and easy adjustment of indication range, decimal point position, digital signal filter and user calibration.
Parameter configuration is password protected and can be done directly via the front panel keys of the loop indicator. The configured parameters are stored in non-volatile memory, keeping them safe in the event of a loop break.
| To Order the model below scroll to the top of the page then click on ADD TO CART button |
| PART NUMBERS | DESCRIPTION |
| LoopView | Transducer Mount Loop Powered Current Indicator |
| Downloads |
| LoopView User Manual |
SPECIFICATIONS
Display: 4-digit red LED display
Indicating Range: -1999 to 9999 or 9999 to -1999
Configuration: External push buttons
Accuracy: 0.1 % of span ± 1digit
Sample Rate: 10 measurements/s
Data Back-Up: Non-Volatile EEPROM
Electrical Connection: EN 175301-803 A standard (DIN 43650 form A)
Power Supply: 4-20mA loop powered
Max Current Load: 60 mA
Voltage Drop: Below than 10 mA: < 5.4 V, 10 to 12 mA: < 3.9 V, Higher than 12 mA: < 2.8 V
Operation Temperature: -40 to 85 °C
Dimensions: 42.5 x 52.5 x 40.7 mm
Housing Material: ABS (polyurethane gasket)
Protection Rate: IP65, NEMA4X
Certification: CE, RoHS