- Auto-Adaptive PID Control
- PID Parameters Auto-Tuning
- Dual Output: 1 Pulse and 1 Relay
- Output Functions: Control, Alarm 1, Alarm 2
- Configurable Alarms with 8 Different Functions
- Alarm Inhibit Function at Start Up
- Programmable Timer
- “F” key with 3 Possible Functions
- Soft-Start Function
- Measured Value Offset
- Minimum and Maximum Limits for SP Setting
- Minimum and Maximum Limits for Output Value
- Access Password for Configuration Protection
- Factory Calibration Settings Restoration Feature
- Silicone Keypad- Front Panel: IP65, Polycarbonate UL94 V-2
- Enclosure: IP20, Polycarbonate UL94 V-2
- CE and UL Certifications
- Power Supply: 100 to 240 Vac/dc
- High Brightness Red LED Display
The temperature controller N1020 features advanced performance capability for the most complex and critical applications. Based on a high-end microprocessor and designed with a sophisticated auto-adaptive PID algorithm it continuously adjusts the PID parameters for best controlling performance.
The programmable input, configurable dual output along with the full range power supply provide maximum flexibility in application.
The N1020 can accept most process sensors and signals. It works with thermocouples (J, K, T, E, N, R, S and B), RTDs (PT100) and 50 mV.
The N1020 has two outputs. This includes one logical pulse output ( 5 Vdc / 25 mA) and one relay output (SPST-NA).
This 1/32 DIN size PID Controller has extremely small front dimensions of only 48x24 mm and is the right choice for controlling laboratory equipment when panel space is reduced.
The USB interface is used for configuring, monitoring and updating the controller firmware. We provide QuickTune software, which offers features to create, view, save and open settings from the device or files on your computer. You can transfer configurations between different controllers and make backup copies of the configuration.
For monitoring purposes, you can use any supervisory software (SCADA) or laboratory software that supports modbus RTU communication over a serial communication port.
Alarm with Four Timer Modes
The alarm comes equipped with four timer modes – normal operation, activation for a defined time, activation with delay, and intermittent activation.
The N1020 embeds a timer function (decreasing) for applications that require particular process duration.
Popular Models - To order click on the model number (or scroll to the top of the page and choose the desired options from the drop down menus) then ADD TO CART
N1020 Temperature Controller
|N1020-PR-485||N1020 Temperature Controller with RS485 Communication|
|N1020 User Manual|
Dimensions: 25 x 48 x 105 mm (1/32 DIN)
Panel Cutout: 23 x 46 mm (+0.5 -0.0 mm)
Approximate Weight: 75 g
Power Supply: 100 to 240 Vac/dc (±10 %), 50/60 Hz
Maximum consumption: 5 VA
Operation Temperature: 0 to 50 ° C
Relative Humidity: 80 % max
Inputs: T/C, Pt100 an voltage
Input Resolution: 32767 levels (15 bits)
Resolution of Display: 12000 levels (from -1999 up to 9999)
Rate of input reading: up to 55 per second
- Thermocouples J, K, T , E: 0.25 % of the span ±1 ºC
- Thermocouples N, R, S, B: 0.25 % of the span
- Pt100: 0.2 % of the span
- mV: 0.1 %
Input Impedance: Pt100 and thermocouples: > 10 M Ω
Measurement of Pt100: 3 -wire type, ( α=0.00385) With compensation for cable length, excitation current of 0.170 mA
OUT1: Voltage pulse; 5 V / 25 mA
OUT2: Relay SPST, 1.5 A / 240 Vac / 30 Vdc
Front Panel: IP65, Polycarbonate (PC) UL94 V - 2
Enclosure: IP30, ABS+PC UL94 V - 0
Electromagnetic Compatibility: EN 61326 -1:1997 and EN 61326 -1/A1:1998
Immunity: EN61000 - 4 -2, EN61000 - 4 -3, EN61000 - 4 -4, EN61000 - 4 -5, EN61000 - 4 -6, EN61000 - 4 -8 and EN61000 - 4 -11
Safety: EN61010 -1:1993 and EN61010 -1/A2:1995 (UL file E300526)
Certifications: CE, UKCA and UL
USB interface 2.0, CDC class (virtual communications port), Modbus RTU protocol.
Specific connections for type fork terminals; programmable level of PWM DE 0.5 up 100 seconds; starts up operations after 3 seconds connected to the power supply