- Accepts Thermocouples Type J, K, T, R, S, E, N and PT100 RTD
- Outputs: Logic Pulse (for Driving Solid State Relays), Up to 2 SPST Relays and 1 SPDT Relay or 4-20 mA Output
- Outputs Have Three Programmable Functions: Control, Alarm 1 and Alarm 2
- Alarm Functions: Lo, Hi, Differential, Differential Lo, Differential Hi, Sensor Break and End of Program
- Control Ouput Is Disabled in Case of Sensor Break or Sensor Misconnection or Malfunction
- Ramp and Soak with 9 Program Segments
- Autotune PID Parameters
- Keypad Is Hardware Protected Avoiding Tampering
- Optional 4-20 mA Output
- Full Range 85 to 250 Vac Power Is Standard and 24 Vdc/ac Is Optional
- Easy-to-set Programming Menu for Non-experienced Users
- 1/16 DIN Size
The N480D series of PID temperature controllers was designed for non-experienced novice users combining extreme simplicity in operation with a performance only found in expensive high end controllers.
The N480D is a family of low-cost temperature controllers which can be easily installed and operated. They accept most thermocouples and Pt100 RTD, featuring relay and pulse output for driving solid state relays.Optionally they can be supplied with a linear 4 to 20 mA output.
Autotune PID function, dual display, full range universal power supply and ramps soak function are standard.
The N480D surpasses old and obsolete analog controllers in performance with the added benefit of ease of operation.
RAMP AND SOAK
The ramp and soak feature allows the process temperature to change gradually from an initial value to a specified final value in a ramp-like behavior. The initial value of the ramp will always be the initial process temperature and the final value will be the set point value. The user determines the speed of the ramp in degrees per minute. The time the process is held at the setpoint(soak) is adjustable between 0 and 9999 minutes. Up to 9 ramp and soak segments may be programmed. The ramp and soak functionality may also be disabled.
The USB interface is used to configure, monitor or update the controller firmware. For monitoring purposes, the user can use any supervisory software (SCADA) or laboratory software that supports MODBUS RTU communication over a serial communication port. When connected to a computer's USB, the controller is recognized as a conventional serial port (COM x).
QUICKTUNE CONFIGURATION SOFTWARE
QuickTune is a free software tool for the configuration of NOVUS controllers and indicators. With its clean interface, a novice or advanced user can access and modify all device parameters. Designed for easy and quick controller configuration, Quicktune provides diagnosis and monitoring features. More than a software, QuickTune is a tool which can save time and effort in setting up a single or multiple controllers
To Order - To order click on the model number (or scroll to the top of the page and choose the desired options from the drop down menus) then ADD TO CART
N480D with 1 relay and 1 pulse output, 85 to 250 Vac power
|N480D-RP-24V||N480D with 1 relay and 1 pulse output, 24 Vdc/Vac power|
|N480D-RPR||N480D with 2 relays and 1 pulse output, 85 to 250 Vac power|
|N480D-RPR-24V||N480D with 2 relays and 1 pulse output, 24 Vdc/Vac power|
|N480D-RRR||N480D with 3 relay Outputs, 85 to 250 Vac power|
|N480D-RRR-24V||N480D with 3 relay Outputs, 24 Vdc/Vac power|
|N480D-RAR||N480D with 2 relays and 1 Analog 4-20mA Output, 85 to 250 Vac power|
|N480D-RAR-24V||N480D with 2 relays and 1 Analog 4-20mA Output, 24 Vdc/Vac power
|N480D Data Sheet|
|N480D User Manual|
Thermocouple Type J, -50 to 760°C
Thermocouple Type K, -90 to 1370°C
Thermocouple Type T, -100 to 400°C
Thermocouple Type R, 0 to 1760°C
Thermocouple Type S, 0 to 1760°C
Thermocouple Type E, -30 to 720°C
Thermocouple Type N, -90 a 1300°C
RTD 2 or 3-wire Pt100 RTD, α=0.00385, -200°C to 530°C
Thermocouples J, K, T, E: 0.25 % of the span ±1 °C
Thermocouples N, R, S, B: 0.25 % of the span ±3 °C
Pt100: 0.2 % of the span
Input Impedance: >10 MΩ
Internal A/D Resolution: 15,000 levels
Display Resolution: 7,500 levels
Sampling Rate: 5 measurements per second
Control Output Update: 200 ms
OutA/OutC: Relay SPST-NA: 1.5A/240 Vac
OutB: Voltage pulse for SSR, 12 V max./20 mA
OutD(RPR/RRR): Relay SPDT:3 A /250 Vac
OutD (RAR): 0-20 mA or 4-20 mA
USB Interface: 2.0, MODBUS RTU protocol
Operating Temperature: 5 to 50°C
Relative Humidity: 80% max. up 30°C
Power: 85 to 250 Vac, 50/60 Hz; optional 24 Vdc/ac
Panel Cutout: 45.5 mm x 45.5 mm.
Enclosure Rating: front panel IP65 (NEMA 4X), rear box IP30