- Control AC Power Via WiFi or Cellular Connection
- Automatic and Manual Control Modes
- External Probes for Monitoring Temperature, Humidity, CO2 and More
- Remotely View Voltage, Current, Power, Cumulative Power Consumption
- Cloud Platform for Data Display and Recording - No Subscription Fee
- Free App for Mobile Devices
- Supports IFTTT, Alexa, Google Assistant, Google Sheet
The SP1 is a remotely controlled AC plug that enables full control of connected devices via WiFi or mobile cellular connection. The SP1 can turn on or off AC power via it's local button, or remotely through a browser by the web console or through the mobile app. The SP1 also connects to external probes which can monitor various environmental parameters and transmit the data to the cloud platform or mobile app for viewing real time or historical data. The cloud platform can also trigger alerts when any of the measurements go out of a preset range. Alerts can be sent via email, app notification, SMS, voice call, or HTTP.
Muliple Control Modes
The SP1 supports multiple ways of controlling AC power. These modes include a virtual toggle switch for remote manual control plus three different time based control modes. You can even control AC power based on the remote the remote probe input. All control modes can be overridden by a toggle button on the SP1.
Manual Activation- A virtual toggle switch allows you to manually activate/deactivate the power.
Timed Task - Define time of day when the switch is activated or deactivated. It can be a one time event or reoccurring event.
Cyclic Task -Cycle the AC power on and off with adjustable on and off periods as well as when and how often the cycle occurs.
Delayed Timed Task - Activate or deactivate the switch after a specified period of time in hours and minutes.
Control Based On Remote Probe Measurement - The measurement value of remote probes connected to the SP1 can also be used to trigger the activation of the AC power. Since the control logic is implemented within the cloud platform this type of control is not recommended for critical control since loss of connection to the cloud will interrupt the control operation.
Optional Remote Probes for Monitoring, Recording and Alerts and More
The SP1 has two external sensor interfaces, RS485 and DS18B20 communication protocols, which allow it to connect to external probes.
Accessories
 |
Audio Plug Splitter for GS1, splitter cable for remote plug connector. View Details |
 |
CO2 Probe. View Details |
 |
DS18B20 External Temperature Probe. View Details |
 |
PT100 Industrial grade temperature probe, -200°C to 400°C temperature range.. View Details |
 |
TH30S-B temperature & humidity probe,-40°C to +80°C (-40°F to +176°F); 0 to 100% RH measurement range.. View Details |
 |
Soil temperature and moisture sensor, -40°C to +85°C (-40°F to +185°F) 0 to 100% RH measurement range. View Details |
 |
Wind speed sensor.. View Details |
A Full Featured Cloud-based Platform For Monitoring, Logging and Alerts
The SP1 transmits data to the UbiBot cloud platform which allows users to view the data from any device which has internet access. The UbiBot Cloud Platform has many powerful features including device management and configuration, data analysis and visualization, real time alerts plus more.
The free cloud plan is a good solution for most users but we also offer several different levels of paid subscriptions for users with large number of units and large data storage requirements. The table below provides a comparison of the different plans.
1. The storage space is cumulative and does not reset monthly but exporting all data will clear the storage space. If your device takes temperature, humidity and light sensor readings every 10 minutes, the free 200MB storage is enough to store over 2 years of data.
2. The Full Data Export amount is on a monthly basis (example 3 times per month for the free plan). If you only export the data collected over single month period, there is no limit on the number of exports as long as the export is less than 8000 records.
3. One credit equals $1 USD.
The UbiBot App Puts All of Your Data in the Palm of Your Hand
Also included is a free app compatible with most mobile devices. With the free UbiBot App you can
- Configure Your Devices
- View Data from All Devices
- Receive Alerts on Your Phone or Mobile Device
- Manage Your Devices
- View Shared Alerts
| To Order the model below scroll to the top of the page then click on and ADD TO CART button |
| PART NUMBER | DESCRIPTION |
SP1-WiFi |
SP1 with WiFi Connectivity |
| SP1-SIM |
SP1 with Cellular Mobile Connectivity |
SPECIFICATIONS
Working Voltage: 110V-240VAC
Maximum Current: 16A
Maximum Power: 3.5kW
Power : ≤0.1W
Voltage Measurement Accuracy：±0.01A，±0.1V，±0.1W
Environment : -10°C to 60°C( 14°F to 140°F)
Compatible External probes (one of each type)
DS18B20 Temperature probe
TH30S-B Temperature & Humidity probe
PT 100 Industrial-grade Temperature probe,
Soil Temperature and Moisture sensor
External CO2 probe
Wind Speed Sensor
Network Connection (model dependent)
WiFi ：2.4GHz or 2.4/5GHz, channels 1-13 (5GHz WiFi NOT supported)
Mobile Networks: LTE FDD: B1/ B3 /B5/ B8; LTD TDD: B34/ B38/ B39/ B40/ B41;
WCDMA: B1/ B8; TD-SCDMA: B34/ B39; CDMA: BC0; GSM Band: 900/1800 MHz
Materials: Flame resistant ABS + PC
Weight: 50g ± 3g
Dimensions：6.4 x 11.7 x 3.5 cm
Ports：1 DS18B20 Audio, 1RS485 Audio
Plug Standard : North American