- Wide Monitoring Range: -40 to 80°C/ 0 to 100% RH
- Accurate Readings, Remotely Accessible
- Rain, Spray and Dust Resistant
- Compatible With WS1 Pro and GS1 device
The TH30S-B is a probe which can measure both temperature and humidity and works with the GS1 and WS1-PRO environmental data loggers.
There are two versions of the TH30S-B; one with a cable that has a micro USB connector that is compatible with the WS1-PRO. The other version of the TH30S-B ha a audio plug connector and is compatible with the GS1(all models except GS1-A).
The measured data is displayed on the large LCD screen of the WS1-PRO or GS1 and synced to the UbiBot cloud platform. You can access the data instantly on the screen or remotely via our app or any browser enabled device on the cloud platform. T he cloud platform can also generate alters when alarm conditions occur. These alerts can be email, SMS text, voice, IFTTT as well as several other forms.
The TH30S-B is moderately waterproof and dust proof which allows it to be deployed it in dusty and somewhat humid environments.
Note: This probe can only be connected to the lower USB port (USB) on the WS1 Pro device.
| To Order click on the model below or scroll to the top of the page then click on ADD TO CART button
|TH30S-B temperature/humidity probe with audio connector for the GS1(all models except GS1-A), 3 meter cable
|TH30S-B temperature/humidity probe with micro USB connector for the micro USB connector for WS1-PRO, 5 meter cable
Size of Probe: 7.5 x 1.5cm (diameter)
Cable Length: 5 meters or 3 meters, unit dependent
Probe Material: PE
Connector: Micro USB or Audio Plug
Power Supply Range: DC 5V to 12V
Operating Condition: -40°C to +80°C (-40°F to +176°F) 0 to 100% RH
Storage Temperature Range: -40°C to +80°C (-40°F to +176°F)
Accuracy: ±0.3°C; ±2%RH
Output Interface: RS485
Communications Protocol: Modbus
IP Rating: IP 42