In areas of high ambient temperature, use the water cooled jacket to keep the sensor body temperature within 0 to 50°C. The water cooling jacket may be fitted to an existing sensor. Cooling water flow rate should be approximately 0.6 l/min.
The integrated air purge must be used to stop condensation forming on the lens while the sensor is being cooled.
Note: The sensor output cable is rated to 80°C ambient temperature
| Model | Description |
| IR-CA-WCJ | Water cooling jacket for use with the PyroCube series S, G, P, and MB |
| IR-CA-WCJF | Water cooling jacket for use with the PyroCube series F and XSB |
| IR-CA-WCJB | Water cooling jacket for use with the PyroCube series F and XSB |