IOThrifty Blog
Understanding PID Control - Keeping It Simple
Intro to the N20K48 WiFi module - Novus Cloud
Learn how to set up the N20K48 PID controller with WiFi connectivity and connect it to Novus Cloud using MQTT. This step-by-step video walks through hardware setup, QuickTune configuration, cloud communication, and how to remotely monitor process variables and setpoints. Ideal for industrial IoT, temperature control, and process automation, the N20K48 with CG-WiFi Module brings affordable, cloud-based monitoring to your application.
Intro to the N20K48 WiFi module - TCP/IP Communication
Learn how to connect and configure the N20K48 PID controller for wireless Modbus TCP/IP communication using the CG-WiFi module. This step-by-step video walks through hardware setup, QuickTune configuration, IP assignment, and reading/writing process data with Modbus Poll. Ideal for industrial IoT and remote process monitoring, this guide helps you turn your N20K48 into a connected, cloud-ready device using standard Modbus protocol over WiFi.
Getting Started with the N20K48 Temperature and Process Controller
This step-by-step video shows how to configure the N20K48 PID controller using the QuickTune desktop software via USB. Learn how to set temperature setpoints, enable on/off control, adjust hysteresis, and choose sensor input types like Type K thermocouples. Perfect for new users, this guide covers control modes, input filtering, output assignments, and power setup for running your temperature control application. Ideal for heating, cooling, and process automation setups.