- Precision ±0.5°C Temperature Accuracy
- ±1% Relative Humidity (RH) Accuracy
- Three 0-10V Outputs and One Programmable RS232 Output
- Industrial Grade Sensor with Temperature Range from -20°C to 120°C
- Corrosion Resistant Stainless Steel Sensor
The RO120 is a precision transmitter that provides quick and accurate humidity, temperature and dew point measurements in a wide range of applications.
The transmitter features three 0-10V outputs and one programmable RS232 output. It has a wide temperature range of -20°C to 120°C and is resistant to most chemicals. This remote type transmitter comes standard with a 6 foot cable and is ideally suited for many different applications such as environmental chambers, compressed air, furnace and industrial applications.
This transmitter stands apart from other hygrometers because of its exceptionally precise ±1% humidity accuracy and a sensor tip which may be replaced in the field without re-calibration.
The item includes a 6 foot cable, 3/4 inch NPT fitting, NIST traceable certificate of calibration, user manual on CD and quick start guide.
The RO120 includes a cable terminating in a card edge connector. The RO120-AB is an optional adapter board that the sensor plugs into and the customer can hard wire to a terminal block.
| To Order the model below scroll to the top of the page then click on ADD TO CART button
|Temperature, Humidity and Dew Point Transmitter
|Screw Terminal Connection Board For TX-RO-120
|RO120 User Manual
|RO120 Data Sheet
Air Temperature : -20 to +120°C
Relative Humidity : 5 TO 95% (non-condensing)
Dewpoint : -60 to +95°C
Air Temperature : ±0.5°C
Relative Humidity : ±1%
Dewpoint : ±1°C
Speed of Response: 12 Seconds ( that is T63, 0 to 90%)
Cable Length: 6 feet, for other lengths contact factory
Probe Length: 8 inch (20.3cm)
Probe Material: 316 stainless steel
Filter: Sintered filter top, removable, field replaceable
Pressure Rating: 700 PSI
Fitting: Adjustable ¾ NPT
Connections: Card-edge connector which may be removed to provide stripped leads
Power Requirement: 18 to 30 Vdc, unregulated, 200 mA max
Manufacturer's Model Number
Manufactured in the USA by Roscid Technologies RO120
(Compatible with Omega Engineering HX85A)