N323-RHT Shown with Optional Temperature/Humidity Probe
N32x-RHT Family of Humidity and Temperature Controllers
SaleSKU:N322-RHT 2 In stock*Ships in 3-4 weeks, if NOT in stock * ships same or next day
Two or Three Relay Outputs for Control or Alarm
On/Off Control - Reverse or Direct Control Action
3½-digit LED Display
Sensor Offset Adjustment
Program Retention During Power Failures
Optional RS485 Interface With Modbus RTU Protocol
The N32xRHT is a family of relative humidity and temperature electronic controllers. The N322RHT has two relay outputs and the N323RHT has three relay outputs. The outputs may be independently configured for either on/off control or as an alarm output. The control outputs can operate with either reverse control action (heating or humidification) or direct control action (cooling or dehumidification). The alarm outputs may be either high alarm, low alarm or set to trigger inside or outside a temperature range. The third output of the NR323RHT may be set as an independent timer.
The N32xRHT works with an external humidity/temperature probe. The sensor of the probe is protected by a polyamide capsule and is available with either a three or six meter PVC insulated cable.
The N32xRH display alternately shows the temperature and humidity. Time between those indications is configurable by the user.
Depending on the model selected, the controller may be powered by either 100 to 240 Vac or 12 to 24 Vac/dc. It is also available with optional RS485 communications with Modbus protocol.
To Order click on the model below or scroll to the top of the page and select the model number then click on ADD TO CART button
Relative Humidity Input Range: 0 and 100 %RH (see figure below) Accuracy: (see figure below) Repeatability: ±1% RH Resolution: 1% Hysteresis: ±1% RH Linearity error: < 1% RH Stability: < 1% RH/year Response time: Approx. 8s to reach 63% of input change(Valid at 25°C and 1 m/s airflow)
Temperature Input Accuracy: (see figure below) Repeatability: ±0.1°C Range: -20 and 100 °C (see figure below) Resolution: 0.1° from –19.9 to 119.9° Response Time: Up to 30 seconds in slow moving air
Output 1: Relay SPDT; 1 HP 250 Vac / 1/3 HP 125 Vac (16 A Res.) Output 2: Relay: 3 A / 250 Vac, SPST-NA Output 3 (N323RHT only): Relay: 3A / 250 Vac, SPST-NA Power Supply Voltage: 100 to 240 Vac/dc ±10% 50-60 Hz or 12 to 30 Vdc (model dependent)
Power Consumption: 5VA Dimensions: 75x33x75mm (WxHxD) Weight: 100g Panel Cut-out: 70 x 29mm Electronic Unit Operating Environment: 0 to 40°C (32 to 104°F) / 20 to 85% RH Sensor Operating Environment: -20 to 100°C (-4 to 212°F) / 0 to 100% RH Case: Polycarbonate UL94 V-2 Protection: Housing IP42, front panel IP65, sensors capsule IP40 (sold separately) Certifications: CE and UL