CTi 3M - Infrared Temperature Sensor for Low Temperature Metals and Composites

• Compact Two-Piece Infrared Pyrometer for Low-Temperature Metals, Metal Oxides, Ceramics, and Composites
• Short-Wave 2.3 µm Spectral Response for Accurate, Repeatable Readings on Metals
• Wide Measurement Range from 30 °C to 1500 °C (86 °F to 2732 °F), Selectable in Sub-Ranges
• Very Fast 320 µs Response Time for Fast-Moving and Rapidly Changing Targets
• Distance-to-Spot Ratio up to 75:1 for Small Targets at a Distance
• Miniature Sensing Head with Separate Electronics for Tight and Hot Installations
• Standard and Close-Focus Optics for Spot Sizes Down to the Millimeter Range
• Choice of 3 m, 8 m, or 15 m Cable Length
• Rugged Industrial Build, Designed and Built in Germany

The CTi 3M is a compact, two-piece infrared pyrometer built for accurate non-contact temperature measurement of demanding materials at relatively low temperatures. Operating at a short wavelength of 2.3 µm, it is tuned for metals, secondary metal processing, metal oxides, ceramics, and composites, and it covers a wide span from 30 °C to 1500 °C (86 °F to 2732 °F). A tiny sensing head paired with separate electronics lets you place the sensor exactly where the measurement needs to happen while keeping the electronics in a safer, more accessible spot.

Why Short-Wave Matters for Metals
Metals are difficult to measure in the long-wave infrared band because their emissivity is low and unstable, which makes readings drift and reflections throw them off. The CTi 3M measures at 2.3 µm, where metals emit more strongly and predictably, so the influence of emissivity uncertainty is much smaller. The result is better accuracy and repeatability on bare, oxidized, and reflective metal surfaces, which is exactly what processes like forging, hardening, casting, and galvanizing demand.

Fast Enough to Keep Up
With a 320 µs response time, the CTi 3M reacts almost instantly to temperature changes, making it well suited to fast-moving parts, rapid induction heating, and quick thermal events that a slower instrument would smear or miss. When your process moves quickly, the measurement keeps pace.

A Two-Piece Design That Fits Anywhere
The sensing head is small enough to mount in confined spaces and close to the target, while the electronics live separately at the end of the cable. This separation keeps the sensitive electronics away from heat and vibration and makes installation far easier in cramped or harsh machinery. Cable length is your choice: 3 m, 8 m, or 15 m.

Optics for Your Target and Distance
The CTi 3M offers a standard-focus lens as well as a range of close-focus optics, with a distance-to-spot ratio up to 75:1. Narrow optics concentrate the measurement onto a very small spot so you can resolve fine detail or measure small parts from a safe distance, while the standard lens suits general-purpose work. Because the optic is matched to the sensor, the field of view and temperature range are selected at the time of order, so confirm your target size and working distance before ordering.

Built for Industry
The CTi 3M is designed for continuous operation in real industrial environments, with a sensing head rated for ambient temperatures from -20 °C to 85 °C (-4 °F to 185 °F). It integrates into your process through its separate electronics and is set up and fine-tuned with the included configuration software. Like the rest of the line, it is designed and built in Germany for dependable, long-term performance.

Typical Applications
Metal processing and secondary metal processing, forging, induction and flame hardening, metal casting and continuous casting, galvanization, and the measurement of metal oxides, ceramics, and composite materials. Anywhere a metal, ceramic, or composite part must be measured accurately at low to moderate temperatures, and often while it is moving quickly, the CTi 3M is designed to read it.

Choosing the Right Optics
The CTi 3M is offered with three lens options so you can match the measurement spot to your target. Standard Focus measures a spot that grows with distance, expressed as a distance-to-spot ratio: the higher the temperature range, the tighter the ratio, from 12:1 on the lowest range up to 75:1 on the two highest. It is the right choice when the sensor is mounted back from the target. Close Focus concentrates the measurement onto a small, fixed spot at a working distance of about 110 mm, for small parts or features at short range. Extra-Close Focus focuses tighter still, resolving the smallest spots at a working distance of about 30 mm, for very small targets measured up close. Because the exact spot size depends on the temperature range you select, use the table below to find the precise figure, then confirm your target size and working distance before ordering. Extra-Close Focus is available on the 30 to 350 °C, 50 to 475 °C, and 100 to 600 °C ranges only.

Standard Focus spot size grows with distance at the ratio shown (for example, at 75:1 the measured spot is 1 mm across for every 75 mm of distance). Close Focus and Extra-Close Focus figures are the smallest measurable spot, achieved at their stated working distance.

SPECIFICATIONS

Type: Two-piece infrared pyrometer (separate sensing head and electronics)
Spectral Range: 2.3 µm (short-wave)
Temperature Range: 30 to 1500 °C (86 to 2732 °F), selectable sub-ranges: 30 to 350 °C, 50 to 475 °C, 100 to 600 °C, 150 to 1000 °C, 200 to 1500 °C
Response Time: 320 µs
Exposure Time: 110 µs
Optical Resolution (D:S): up to 75:1
Optics: standard focus and close-focus options (field of view selected at order)
Cable Length: 3 m (9.8 ft) standard, 8 m (26 ft), or 15 m (49 ft)
Operating (Ambient) Temperature: -20 to 85 °C (-4 to 185 °F)
Measured Materials: metals, metal oxides, ceramics, composites
Configuration: via included software
Country of Origin: Germany

Scope of Supply / What comes with your order
CTi 3M sensing head with the selected optic and temperature range, separate electronics, connection cable in the selected length, mounting hardware, configuration software, and quick start guide.